Structural Studies of Ferrofluids by Small-Angle Neutron Scattering

Abstract. The aim of this paper is to present method to investigate the properties of magnetic fluids by means of small angle neutron scattering. Ferrofluids are dispersions of small, single-domain magnetic particles suspended in a fluid carrier. The neutron scattering methods have been largely used the last two decades for the determination of structural properties of magnetic liquids at microscopic level. There can be investigated the structure of the particle, the aggregation phenomena, the magnetic liquid dynamics, particle-surfactant interaction, surfactant liquid-base interaction and structure, magnetic behavior of the samples. Experiments on small angle neutron scattering were carried out on SANS instrument YuMO in function at IBR-2 high-pulsed reactor at the Fran

EFFECTS OF ALPHA PARTICLES IRRADIATION ON THE PHOTO- ELECTRICAL PROPERTIES OF CdS/CdTe HETEROJUNCTIONS

The effects of irradiation with energetic alpha particles on the electrical properties of CdS/CdTe thin films photovoltaic cells were studied. The irradiation energy and the fluency of alpha particles were 3 MeV and 10 13 alpha particles/cm 2 , respectively. The samples were fabricated in "superstrate" configuration, with a CdS thin film as window layer and CdTe as an active layer. The films were deposited by conventional thermal vacuum evaporation. To improve the structural properties of the obtained samples thermal and chemical treatments were made. The photovoltaic response of the structures was analyzed before and after alpha particles irradiation and the results were compared

The influence of LiF layer abd ZnO nanoparticels addings on the performances of flexible photovoltaic cells based on polymer blends

International audienceFlexible organic solar cells were successfully prepared using spin-coating technique on PET substrates covered with a thick layer of ITO. The goal of this study is to identify the effects of the LiF layer and ZnO nanoparticles mixing in PEDOT:PSS solution and to compare the photovoltaic properties of these „customized” cells PET/ITO/PEDOT:PSS + ZnO nanoparticles/P3HT:PCBM(1:1)/Al, PET/ITO/PEDOT:PSS + ZnO nanoparticles/P3HT:PCBM(1:1)/LiF/Al, with ones of the “conventional” structures, PET/ITO/PEDOT:PSS/P3HT:PCBM(1:1)/Al. The thickness of the LiF layer, deposited by thermal vacuum evaporation, was two nanometers. Composite samples were prepared by adding ZnO nanoparticles into PEDOT:PSS solution, followed by ultrasonication. I-V characteristics were measured in dark and under A.M.1.5 conditions for all samples immediately and after one month from the preparation date. The action spectra measurements revealed that the structures which have a nanometric LiF layer are more stable than those without. Photoelectrical measurements indicate that the ZnO nanoparticles have a positive influence on the conversion efficiency and also to reduce the serial resistance of the structure

Measurement of shower development and its Moli\`ere radius with a four-plane LumiCal test set-up

A prototype of a luminometer, designed for a future e+e- collider detector, and consisting at present of a four-plane module, was tested in the CERN PS accelerator T9 beam. The objective of this beam test was to demonstrate a multi-plane tungsten/silicon operation, to study the development of the electromagnetic shower and to compare it with MC simulations. The Moli\`ere radius has been determined to be 24.0 +/- 0.6 (stat.) +/- 1.5 (syst.) mm using a parametrization of the shower shape. Very good agreement was found between data and a detailed Geant4 simulation.Comment: Paper published in Eur. Phys. J., includes 25 figures and 3 Table

Performance of fully instrumented detector planes of the forward calorimeter of a Linear Collider detector

Detector-plane prototypes of the very forward calorimetry of a future detector at an e+e- collider have been built and their performance was measured in an electron beam. The detector plane comprises silicon or GaAs pad sensors, dedicated front-end and ADC ASICs, and an FPGA for data concentration. Measurements of the signal-to-noise ratio and the response as a function of the position of the sensor are presented. A deconvolution method is successfully applied, and a comparison of the measured shower shape as a function of the absorber depth with a Monte-Carlo simulation is given.Comment: 25 pages, 32 figures, revised version following comments from referee

ECFA Detector R&D Panel, Review Report

Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.Comment: 61 pages, 51 figure

Detector Technologies for CLIC

The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Standard Model processes, particularly in the Higgs-boson and top-quark sectors. The precision required for such measurements and the specific conditions imposed by the beam dimensions and time structure put strict requirements on the detector design and technology. This includes low-mass vertexing and tracking systems with small cells, highly granular imaging calorimeters, as well as a precise hit-time resolution and power-pulsed operation for all subsystems. A conceptual design for the CLIC detector system was published in 2012. Since then, ambitious R&D programmes for silicon vertex and tracking detectors, as well as for calorimeters have been pursued within the CLICdp, CALICE and FCAL collaborations, addressing the challenging detector requirements with innovative technologies. This report introduces the experimental environment and detector requirements at CLIC and reviews the current status and future plans for detector technology R&D.Comment: 152 pages, 116 figures; published as CERN Yellow Report Monograph Vol. 1/2019; corresponding editors: Dominik Dannheim, Katja Kr\"uger, Aharon Levy, Andreas N\"urnberg, Eva Sickin

Performance and Molière radius measurements using a compact prototype of LumiCal in an electron test beam

A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future linear e+e- collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY with an electron beam of energy 1–5 GeV. The performance of a prototype of a compact LumiCal comprising eight detector planes was studied. The effective Molière radius at 5 GeV was determined to be (8.1 ± 0.1 (stat) ± 0.3 (syst)) mm, a value well reproduced by the Monte Carlo (MC) simulation (8.4 ± 0.1) mm. The dependence of the effective Molière radius on the electron energy in the range 1–5 GeV was also studied. Good agreement was obtained between data and MC simulation. © 2019, The Author(s)